DS-03S Dry ice blaster

DSJet Dry ice blaster

DSJet dry ice cleaning equipment DS-03S help industrial environmental protection cleaning, use dry ice (solid carbon dioxide) as the main cleaning medium, through the surface blast cleaning, you can achieve non-destructive cleaning effect, automated dry ice cleaning is possible, you can achieve PCBA cleaning, wafer cleaning, and other types of precision cleaning.

Related accessories

No related accessories!!

Built-in efficient filtration device, efficient and fast filtration of air water, oil, rust and other impurities. Fully guarantee the pcba circuit board and precision mold safety and environmental protection of lossless cleaning.

Traditional cleaning methods use chemicals and manual tools, which are dry and inefficient. Desijie's alternative cleaning process provides a non-wear and environmentally friendly way to complete electronics cleaning and molds in a very short time, thus extending the period of preventive maintenance intervals. In addition, it can be run in situ.

The core components of the equipment are all imported components

Ice discharging mode: single tube

Dry ice capacity: 9.1Kg

Use size of dry ice cubes: 150mm * 150mm * 300mm/125mm * 125mm * 300mm.

The dosage of dry ice is adjustable: 0-0.6Kg/min.

Spray dry ice particles: 0-0.3mm.

Gas supply pressure range: 0.15-9.9bar

Compressed air flow range: 0.8-4m3/min.

External dimensions: 570mm * 400mm * 510mm (length * width * height)

Power supply: 220VAC, 1ph(50Hz)4Amp.

Equipment weight: 50kg

Advantages of dry ice cleaning

1.Efficient

Traditional cleaning requires disassembly, cooling, cleaning and reassembly; dry ice cleaning can be cleaned online without removing equipment; improve efficiency and ensure the accuracy of equipment.

2.Completely

It is difficult to clean the mold with high precision and complex structure; dry ice cleaning can effectively clean the corners, gaps and dead corners; no pollution, no residue and green protection.

3.No damage

Traditional cleaning, grinding, soaking and other methods damage the mold circuit board, reduce the accuracy and product quality; dry ice cleaning strength can be adjusted arbitrarily, no damage to the mold and pcba circuit board, prolong the service life of the mold, and improve the product quality.

4.Dry

Traditional cleaning will use water, solvent, produce conductive, residual; dry ice cleaning can contact the electrical part, no conductive, no corrosion, no rust.

5.Environmental protection

Traditional cleaning uses water and solvents, which affects human health, causes secondary pollution to the environment




Ice discharging mode: single tube
Dry ice capacity: 9.1Kg
Use size of dry ice cubes: 150mm * 150mm * 300mm/125mm * 125mm * 300mm.
The dosage of dry ice is adjustable: 0-0.6Kg/min.
Spray dry ice particles: 0-0.3mm.
Gas supply pressure range: 0.15-9.9bar
Compressed air flow range:0.8-4m3/min.
External dimensions:  570mm * 400mm * 510mm (length * width * height)
Power supply:  220VAC, 1ph(50Hz)4Amp.
Equipment weight:50kg


  • Online cleaning, no need to dismantle the equipment

  • No pollution, no residue, environment friendly

  • Non-conductive, non-corrosive, non-rusting

  • No secondary waste